Control Panel×セキュリティハウス - メーカー・企業と製品の一覧

Electric Lock Control Panel Communication Type Random Keypad Model DM-110TK

This product, which combines a numeric keypad operation unit with a highly versatile electric lock control panel, is designed for ease of use in various locations.

■Basic design of the operation unit considering usability ● The position of the displayed numbers in the "operation unit" changes with each verification. (Fixed display is possible) ● Special film is used to prevent peeking from the side. ● Up to three types of PIN codes with 1 to 8 digits can be registered. ● The numeric keypad can be connected to one electric lock control panel with up to two units inside and outside. ■Three operating modes of the electric lock control panel ● The operating modes can be selected from "Automatic Locking Mode," "Repetitive Lock/Unlock Mode," and "Manual/Automatic Locking Mode." ● In "Automatic Locking Mode," the unlocking operation using the buttons on the main panel can be disabled by the panel lock function. ■Fire alarm linkage function In addition to continuous unlocking input, a fire alarm input is equipped. While the signal (no-voltage a contact) from the fire alarm panel is active, unlocking is maintained. (Locking is linked to fire alarm recovery) ■Standard equipment for unlocking prohibition input An additional contact signal input is provided to disable the unlocking buttons on the panel and external inputs. Unlocking operations can be prohibited in conjunction with security signals and tamper signal inputs. (Even during the unlocking prohibition, unlocking via fire alarm input takes priority.)

企業：セキュリティハウス
価格：Other

Entrance and exit control system

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

Multi-line electric lock control panel for 8 lines BAN-AS8

It is a two-wire multi-line electric lock control panel.

■Features ● Operates electric locks or electric strikes remotely. Controls electric locks integrated with a two-wire conversion adapter using two wires. ● Unlocks the electric lock (electric strike) with an operation button, and the status of locking/unlocking and door opening/closing can be confirmed with a display lamp. ● Can control up to 32 electric locks or electric strikes. BAN-AS4: up to 4, BAN-AS8: up to 8, BAN-AS16: up to 16, BAN-AS24: up to 24, BAN-AS32: up to 32. ● Automatically identifies the type of electric lock used. ● Control of the electric lock can be set to either automatic locking (Mode A) or repeated operation (Mode B). ● Up to 5 operation display units can be connected for each electric lock (electric strike). ● Electric locks can be controlled via external inputs (voltage-free contacts) such as intercoms, timers, and fire alarm systems. * The two-wire conversion adapter AD211 is included. ● Equipped with JEM-A terminals for easy connection to HA systems. ● In case of an abnormality (such as disconnection or forced entry) in the electric lock, an alarm output (voltage-free C contact) can be generated.

企業：セキュリティハウス
価格：Other

Entrance and exit control system

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

Electric Lock Control Panel DM-110K

Universal Electric Lock Control Panel This is a universal electric lock control panel compatible with most electric locks from various manufacturers. (Also compatible with magnetic locks.)

■Three Operation Modes ● You can choose from three operation modes: "Automatic Locking Mode," "Repeated Locking/Unlocking Mode," and "Manual/Automatic Locking Mode." ● In "Automatic Locking Mode," the panel lock function can disable unlocking operations using the buttons on the main panel. ■ Fire Alarm Link Function In addition to continuous unlocking input, a fire alarm input is equipped. While the signal (no-voltage a contact) from the fire alarm panel is active, unlocking is maintained. (Locks automatically when the fire alarm is restored.) ■ Supports Long-Distance Wiring Regardless of the type of electric lock, wiring is possible up to 150m (φ0.9mm-3P). (When the device is powered by AC100V.) ■ Standard Equipped with Unlocking Prohibition Input An additional contact signal input is provided to disable the panel's unlocking button and external inputs. This allows you to prohibit unlocking operations in conjunction with security signals or tamper signal inputs. (Unlocking via fire alarm input takes precedence even during the prohibition of unlocking.) ■ Various Operation Sub-Devices Can Be Connected In addition to the operation sub-devices RSP-200TKR (exposed type) and RSP-200TKU (embedded type), Miwa Lock's operation sub-devices: SSP-C1D, SSP-C1E, etc., can also be connected.

企業：セキュリティハウス
価格：Other

Entrance and exit control system

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

Electric Lock Control Panel (Single Circuit Power Failure Compensation Type) DM-700

High-performance 2-wire electric lock control panel

■Power Outage Compensation The external power supply is DC12V500mA with ample capacity, and it has a built-in power outage compensation circuit that lasts approximately 30 minutes, allowing for the connection of a numeric keypad, card switch, and even fingerprint verification switch. ■Compact Adapter with Two-Wire System The main electrical control panel is connected to the included two-wire electric key adapter using CPEVφ0.9-1P or AEφ0.9-2C. ■Control Output is Voltage-Free Relay Contact Output State outputs for door opening, unlocking, and temporary unlocking are provided via voltage-free relay contacts. It can be directly connected to security transmitters or automatic reporting devices. ■Abnormalities in Electric Lock Indicated by Alarm If the door is left open abnormally for a set time, or if there are issues such as forced entry or disconnection in the electric lock, it will be indicated by an LED and alarm buzzer (volume adjustable), and the alarm output (voltage-free relay contact) will also be activated. ■Various Operation Sub-Devices Can Be Connected In addition to the operation sub-devices RSP-200TKR (exposed type) and RSP-200TKU (embedded type), Miwa Lock's operation sub-devices such as SSP-C1D and SSP-C1E can also be connected.

企業：セキュリティハウス
価格：Other

Entrance and exit control system

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

Multi-line electric lock control panel for 16 lines BAN-AS16

It is a two-wire multi-line electric lock control panel.

■Features ● Operates electric locks or electric strikes remotely. Controls electric locks equipped with a two-wire conversion adapter using two wires. ● Unlocks the electric lock (electric strike) with an operation button, and the status of locking/unlocking and door opening/closing can be confirmed with a display lamp. ● Can control up to 32 electric locks or electric strikes. BAN-AS4: up to 4, BAN-AS8: up to 8, BAN-AS16: up to 16, BAN-AS24: up to 24, BAN-AS32: up to 32. ● Automatically identifies the type of electric lock used. ● Control of the electric lock can be set to either automatic locking (Mode A) or repeated operation (Mode B). ● Up to 5 operation display units can be connected for each electric lock (electric strike). ● Electric locks can be controlled via external inputs (voltage-free contacts) such as intercoms, timers, and fire alarm systems. * The two-wire conversion adapter AD211 is included. ● Equipped with JEM-A terminals for easy connection to HA systems. ● In case of an abnormality (such as disconnection or forced entry) in the electric lock, an alarm output (voltage-free C contact) can be generated.

企業：セキュリティハウス
価格：Other

Entrance and exit control system

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

Heater-equipped infrared beam switch control panel DSHC-11

Heater-equipped infrared beam switch control panel capable of operating in ambient temperatures as low as -25°C.

■Usable ambient temperature supports down to -25℃ This is a control panel for an infrared beam switch with a heater, which can be used as a supplementary light beam to prevent pinching in automatic doors and shutters in cold regions and cold storage. ■Heater-equipped sensor unit The waterproof heater-equipped sensor unit reduces malfunctions caused by condensation or fogging in cold storage, as well as ice formation and snow accumulation in cold regions. ■Power supply voltage supports a wide range The power supply voltage supports a wide range from AC100 to 200V. ■Detection distance The detection distance is up to 10m. ■User-friendly design ● By adding the optional sensor unit BS-10NH, it can support two light axes. ● The wiring code for the light-emitting side is 15m, and the wiring code for the receiver is 10m, allowing the sensor connection code to be cut to fit the installation environment. *The sensor unit is sold separately.

企業：セキュリティハウス
価格：Other

Safety Sensors

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

Control Panel×セキュリティハウス - メーカー・企業と製品の一覧

Control Panelの製品一覧

Electric Lock Control Panel Communication Type Random Keypad Model DM-110TK

Multi-line electric lock control panel for 8 lines BAN-AS8

Electric Lock Control Panel DM-110K

Electric Lock Control Panel (Single Circuit Power Failure Compensation Type) DM-700

Multi-line electric lock control panel for 16 lines BAN-AS16

Heater-equipped infrared beam switch control panel DSHC-11

Control Panelに関連する検索キーワード